Graphtec CE6000 Vinyl Cutter – 24" model

Configuration Grit rolling type, digital servo drive
Max. cutting area
(Guaranteed cutting area) 375 mm x 50 m *1
(356 mm x 2 m *1) 603 mm x 50 m *1
(584 mm x 5 m *1) 1213 mm x 50 m *1
(1194 mm x 5 m *1)
Mark scanning margin Type 1 mark: Front 15 mm, Rear 35 mm, Left/Right 15 mm
Type 2 mark: Front 17 mm, Rear 37 mm, Left/Right 15 mm (Length of media up to 2 m)
Number of push roller 2 rollers 2 rollers 4 rollers 4 rollers
Max. cutting speed 600 mm/s (All directions) 900 mm/s (at 45º direction) 1000 mm/s (at 45º direction)
Max. acceleration 21.2 m/s2 (at 45º direction) 13.9 m/s2 (at 45º direction)
Max. cutting force
(Instantaneous max. force) 2.94 N (300 gf) in 31 steps
(3.2 N (330 gf)) 4.41 N (450 gf) in 38 steps
(4.9 N (500 gf)) 4.41 N (450 gf) in 38 steps
(4.9 N (500 gf))
Minimum character size Approx. 5 mm alphanumeric (varies depending on character font and type of media)
Repeatability Max. 0.1 mm in plot up to 2 m *1
Mountable number of tools 1 tool
Blade type Supersteel
Pen type Oil-based ballpoint, Water-based fiber-tip pen
Media type Self-adhesive marking film (vinyl, fluorescent, reflective) excluding high-intensity reflective film, up to 0.25 mm thickness
Polyester film, up to 0.25mm thickness (unguaranteed accuracy)
Perforation cutting Yes (performed by force control)
Interface RS-232C / USB2.0 (High Speed)
Buffer memory 2 MB
Command sets GP-GL / HP-GL™ emulation (Set by the menu or the command, and selects from GP-GL, HP-GL™, or Auto detect)
Display Graphic type LCD with backlight (240dots x 128dots)
Registration mark sensing system Scans the mark by optical sensor (ARMS5.0)
Power source 100 to 120, 200 to 240 V AC (Auto switch), 50 / 60 Hz
Power consumption 120 VA
Operating environment
(Guaranteed accuracy) 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
(16 to 32 ºC, 35 to 70 % R.H. (non-condensing))
External dimensions (W x D x H, Approx. [mm]) 672 x 338 x 266 900 x 593 x 1046 1541 x 736 x 1250
Weight 10.5 kg 21 kg (including stand) 40.5 kg (including stand)
Included software *2 Windows Driver, Graphtec Studio, Cutting Master 3, Plotter Controller
Compatible OS *2 Windows 10 / 8.1 / 8 / 7 / Vista , Mac OS 10.6 to 10.10
Compatible Standards Safety: cUL / CE mark, EMC: VCCI Class A / FCC Class A / EN55022 Class A